How To Use Ip Camera Over Wifi

In this article, there are five ways you can connect your Security IP Camera to your computer. And nosotros volition embrace the steps on how y'all should exercise it without a router, without internet, without a DVR/NVR or without its receiver. The post-obit tabular array summarizes the important information about connecting IP camera to your computer for your reference.

Photographic camera types:	POE camera or WiFi camera
OS(operation organisation):	Windows or Mac
Cable:	2-in-1 or 3-in-1 cable attached from the camera
Remotely admission by:	Camera's UID

Note: Start you should install the security camera in the right place. You tin refer to How to Install Domicile Security Cameras Successfully.

5 Methods to Connect Your Security IP Camera to PC/Mac：

To make information technology easier for you to find the right solution, you can click and leap directly to the department yous want.

For instance, if your photographic camera is a PoE photographic camera, then you tin choose option 3 or four.

one. Connect Directly to PC/Mac (without Internet)
ii. Connect via Router (with Internet)
3. PoE (Wired) Camera without Injector/Switch
four. PoE (Wired) Photographic camera with Injector/Switch
v. Connect a CCTV Camera System to PC/Mac

Of import Notation: The methods recommended below may Not apply for the battery-powered security cameras, which require initial setup on your phones.

Connect a WiFi or PoE Camera Directly to PC/Mac (without Internet)

Hither's how to connect your security IP camera direct to a PC/Mac without an NVR or DVR, without a router network, without WiFi, and without whatsoever costs or complicated configurations.

you lot need to prepare the photographic camera's power adapter and a network cablevision.

ane. Get your security camera charged.

Use the ability adapter to get the camera plugged-in and charged. Ordinarily, when you buy a WiFi IP camera, information technology comes with a power adapter. For a PoE camera, ask the supplier and buy one that's workable for the photographic camera.

ii. Use the network cable to connect to the camera and the computer.

Normally there would be a two-in-1 or 3-in-1 cable attached from the photographic camera. Find the network connector from that cable and utilize the network cablevision to connect to it. And so connect the other end of the network cable to the reckoner. If your computer has a network already, disable it – make certain your estimator is offline. Connect IP Camera Directly to PC

3. Browse and detect out the security camera'due south IP address on the computer.

Now the security photographic camera is connecting to your computer basically and physically. But you lot all the same tin't view the camera on the computer. What you lot need to practice now is to scan and find out the camera's IP address. There should be surveillance software from the aforementioned supplier with the photographic camera. Have our test as an example. We accept Reolink Client on the computer. Launch information technology and it will automatically scan all the cameras in the same local LAN and show the default IP accost (every photographic camera has a default and unique IP address when it leaves the factory). Like shooting fish in a barrel peasy! Camera IP Address

4. Modify the figurer's IP accost to the same network prefix of the IP photographic camera.

So in Pace iii, you get your security camera'south default IP address. In our test, the default IP address of the photographic camera we apply is 192.168.177.100, and now you lot need to change your computer'due south IP accost to 192.168.177.ten, where 10 identifies the node/host and is the number between ii and 254. And then allow's say the computer's IP accost is 192.168.177.12.

IP address 101: An IP accost consists of two parts – 1 belongs to the network address and one belongs to the node address. All nodes on a given network share the same network prefix but have a unique host number.

Now to alter the computer's IP address (we have Windows 10 as an example):

1) Press the Windows + R keyboard shortcut to bring out the Run box.

2) Enter "ncpa.cpl" and open the "Network Connections" window.

Computer Run Box

3) Correct-click your computer' network adapter and select "Backdrop".

Network Adapter Properties

four) Select your computer's Internet Protocol Version and click "Properties".

Internet Protocol Properties

5) Select "Employ the following IP address" and change the IP address into 192.168.177.12.

Change Computer IP Address

And done. Now your IP photographic camera is connecting direct and communicating with your PC, because they are now in the same little LAN. Yous tin watch your IP camera with Reolink Client on your reckoner.

Important: Since there is no router network, the IP camera would not transmit data or send alarms to your phone. Even so, you can record and save all the footage onto your computer.

If you lot're gonna apply your IP photographic camera with the reckoner all the time similar this (without router network), yous'd better modify the default condition of your IP camera's IP address to the static to go on it the same all the fourth dimension, because each time you reboot the IP camera, its IP address will be changed and you volition need to practice all the steps above once more. To keep the IP camera's IP address the same all the time, caput to "Device Settings" and "Network General" on the Client (Reolink Customer in our test), and choose "Static" for "Network Admission". And done. Static IP Address for Camera

Connect a Wireless/WiFi Camera to Computer via Router (with Net)

If you exercise have WiFi network and need to remotely see the IP camera when yous're not at that place, you can connect your wireless or WiFi camera to reckoner wirelessly via your router. Please note that y'all need to take, at least, a ability adapter for the camera, a network cable, and a router.

1. Get your WiFi security camera charged.

Use the power adapter to get the camera plugged-in and charged.

2. Utilise the network cable to connect to the photographic camera and the router.

A WiF camera needs to connect to the router with a network cable for initial setup, because the new camera itself wouldn't recognize and motorcar-option up a network that it never uses. Only afterwards the correct WiFi settings can yous disconnect the cable from the camera and the router. And yeah again, commonly there would exist a 2-in-1 or 3-in-1 cable attached from the WiFi camera. Find the network connector from that cablevision and use the network cable to connect to it. So connect the other terminate of the network cablevision to the router. Connect WiFi Camera to PC

3. Watch the IP camera on PC/Mac

On the figurer, launch the surveillance software to add together the camera and watch live view directly. In our exam, we open Reolink Customer. Since the computer and the photographic camera are in the aforementioned network (using the same router network), Reolink Client automatically searches and displays the photographic camera direct. Click "Starting time" and you lot can view the camera on PC. And you tin set upward the configurations for all the functions you want the photographic camera to take.

4. Ready WiFi settings and remove the network cablevision.

Do retrieve to make the WiFi settings for the camera. On the software, navigate to "Device Settings" and "Network". Cull the WiFi network and enter the password, and washed. Cameras from the different brands would have different WiFi settings. Please refer to the guides you lot get from your supplier. After that, remove the network cable, and so the security IP CCTV camera connects to the computer wirelessly.

Important: If you need to see the IP camera from some other computer that is not in the same network, y'all need to input the camera's UID into the software to remotely access the photographic camera.

Connect a PoE (Wired) IP Camera to Computer without PoE Injector/Switch

Connecting a PoE wired IP camera to a reckoner via the router is like to that of a WiFi camera, and even much easier – y'all don't need to use a power adapter, set up the WiFi and remove the network cable. And you need at least one network cablevision, and a router with PoE adequacy to complete the setup.

1. Use the network cable to connect to the camera and the router.

PoE (Ability over Ethernet) ways you can simply utilize a single network cablevision for both video and power transmission. So only connect the camera to the router via the network cable, and the photographic camera will become ability supply and network access. Cloud Storage Please make certain your router has the PoE feature. If not, endeavor the side by side method.

2. Watch the IP photographic camera on the computer.

On the computer, launch the surveillance software to add the camera and spotter live view directly. In our exam, we open Reolink Customer. Since the computer and the camera are in the same network, Reolink Customer automatically searches and displays the camera direct. Click "Start" and you can view the camera on PC. And you lot tin can fix the configurations for all the functions you want the camera to take.

Important: If you need to see the IP photographic camera from some other calculator that is not in the aforementioned network, yous need to input the camera'southward UID into the software to remotely access the camera.

Connect a PoE (Wired) IP Camera to Computer with PoE Injector/Switch

If your router does non support PoE, y'all need a PoE injector or PoE switch to help connect your IP camera to PC.In order to complete the setup yous demand at to the lowest degree a network cablevision, a router, and a PoE injector or PoE switch. Since the steps on how to connect a PoE IP camera to PC via PoE Injector/switch are quite the same to that of connecting without a PoE Injector/switch, we'd similar to go far more than simpler to sympathize here.

1.connect the security camera, router and PoE injector

Connect all the devices as the flick showed below, make sure your wireless IP camera is connected to a ability supply. PoE Camera Connecting to PC

ii. Open up Reolink Client & add the photographic camera directly

You lot tin at present open Reolink Client on your computer, add the camera and scout alive view directly. If yous need to see the IP photographic camera from another computer that is not in the same network, you need to input the photographic camera'south UID into the software to remotely admission the camera.

Important: In one case you connect the PoE IP camera to the PoE injector or switch which is continued to a router via Ethernet cables, y'all've successfully connected the camera to the network. For a wireless IP photographic camera, you need to utilize a network cable to connect it to the router if you lot haven't gear up the WiFi network configuration. And then the wireless IP photographic camera is in the network. Yous tin set the WiFi configuration later on to make the wireless IP camera connect wirelessly.

Connect a CCTV Camera System to PC/Mac (with or without Network)

If you are using a CCTV photographic camera organisation, similar the Reolink PoE kit RLK8-410B4, instead of unmarried security photographic camera, yous may need the following tutorial. A CCTV camera organisation oftentimes have their own proprietary networks, and can work with and without your router network.

1. How to connect a CCTV security photographic camera organisation to a computer without router network

Connect all the cameras to the NVR:When you receive the new IP camera organisation you bought, connect all the devices you got – connect the NVR to your computer's monitor and the mouse, use the power adapters to accuse the NVR and cameras, etc. For a WiFi system, once the WiFi NVR and the WiFi cameras are charged, they connected to each other automatically and would start to communicate. For a PoE system, connect the PoE cameras to the NVR via the network cables provided.
Start watching the IP cameras:The startup and setup wizard will popular up to guide yous to lookout man your cameras and practice other configurations.

Now you lot can see all the IP cameras on your monitor and start recording.

2. How to connect a CCTV security camera system to a reckoner with router network

Practise the step 1 shown above again.
Connect the NVR to your router via the network cable provided.
Start watching the IP cameras.

The startup and setup sorcerer will popular up to guide you to watch your cameras and do other configurations. If you lot need to see the IP cameras from some other estimator that is not in the same network, yous need to input the NVR's UID into the software to remotely access the cameras.

Inforgraphic:

The infographic below also covers our 5 methods to connect IP security camera to PC/Mac . Promise this tin can be helpful to you.

How to Connect Security Camera to PC

3rd-Party Software to Connect IP Camera to PC/Mac

You can also opt for third-party software to connect and prepare a security photographic camera on the reckoner. Make certain the software can handle all the cameras on the network and support all the features for the cameras. Normally, the tertiary-party software has several versions. And if you lot desire to use full features of the camera, yous demand to pay for a premium version. If your security IP camera is not working properly every bit expected or if you get whatsoever issues, y'all tin endeavour the superlative 10 solutions to fix IP cameras non working.

For any questions, please don't hesitate to leave it in your comment. I will respond equally presently as possible.

Source: https://reolink.com/connect-security-ip-camera-to-pc/

Posted by: hamiltonbable1994.blogspot.com